T6/T7 Vane Pump
Greater flow for the envelope size is achieved by increased displacement cam rings
at high permissible speeds with atmospheric inlet
C → 3 to 31 GPM, 10 to 100 ml/rev.
D → 14 to 50 GPM, 48 to 158 ml/rev.
E → 42 to 72 GPM, 132 to 227 ml/rev.
Pressure ratings to 275 bar reduce size and cost of actuators, valves and lines, give
extended life at reduced pressures.
Better efficiency under load increases productivity, reduces heating and operating costs.
Up to 32 positions for double pumps and up to 128 for triple pumps: this reduces mounting
costs and improves performance.
Increase operator safety and acceptance.
To SAE - J744c 2-bolt standards and to ISO 3019-1 (T6EDCS SAE E, T6EDCM ISO
3019/2) in the various keyed and splined shaft options offered.
Provides for drop-in assemblies. This allows easy conversion or renewal of serviceable
elements in minutes at minimum expense and risk of contamination. The “C” & “D” cartridge
pumps are birotational and indicated by “B” description in cartridge model number. Pump
rotation is easy to change by changing position of cam ring on port plate dowel pin hole.
Viscosities from 2000 to 10 cSt permit colder starts and hotter running. The balanced design
compensates for wear and temperature changes. At high viscosity or cold temperature,
the rotor to side plates gap is well lubricated and improves mechanical
efficiency.
Including phosphate esters, chlorinated hydrocarbons, water glycols and invert emulsions
may be pumped at higher pressures and with longer service life by these pumps.
Read More >>